• 在线赢钱·(中国区)手机App官方直营平台

    PIR
    High precision IC with PWM output passively receive and detect infrared radiation. It is widely used for electronic anti-theft, human body detector and smart lighting.
    Program overview
    Passive pyroelectric infrared detectors are widely used in electronic anti-theft, human body detectors, and intelligent lighting. However, PIR signal processing is not simple. It requires developers to invest a lot of time and effort. SDIC provides the SD4000 IC series to reduce the production time and cost. It has high-precision ADC and PWM output for PIR signal acquisition and processing.
    Program advantages

    • Industry standard, good stability

    • Built-in amplifier, high-precision algorithm unit, adaptive to ambient environment

    • Long sensing range, Adjustable sensitivity for convenient usage

    • The output delay time of control signal can be adjusted

    • Built-in masking time, effectively inhibits repetitive malfunction

    • Multi-channel analog input and multi-channel digital output

    • Connect external photo-transistor or photo-resistor to inhibit day light working

    Industry standard, good stability

    Built-in amplifier, high-precision algorithm unit, adaptive to ambient environment

    Long sensing range, Adjustable sensitivity for convenient usage

    The output delay time of control signal can be adjusted

    Built-in masking time, effectively inhibits repetitive malfunction

    Multi-channel analog input and multi-channel digital output

    Connect external photo-transistor or photo-resistor to inhibit day light working

    Features

    • High precision ADC, 20.6bits ENOB at 250sps. It can be set to 2 differential or 4 single-ended inputs (to VSS)

    • 8-bit RISC low power MCU, 49 instructions and 6 stack levels. The typical MCU current consumption is: 700uA at 3V and 2MHz operating clock rate, 2uA at standby and 32kHz clock rate, and 1uA at sleep 8k Bytes OTP, 256 Bytes SRAM

    • OTP with low programming voltage can replace external EEPROM

    • Internal 4MHz and 32kHz RC oscillator. No external clock source is needed

    • 1 channel 8bits PWM0 output

    • Watch Dog Timer

    • All I/O have Schmidt trigger inputs and pull-up resistors

    • Flexible battery voltage detection is 2.4~3.3V

    • Low voltage detection and power on reset circuit

    • Operating voltage range: 2.4V ~ 3.6V

    • Operating temperature range: -40℃~ 85℃

    Application diagram
    Featured products

    Products Video

    Product Consultation

    Solution
    Directory